Bareiss Shore A mechanical Durometer, scale graduation is 0-100 Shore, divided in 100 units Shore A scale.
Teclock mechanical Durometer Shore A GS-709G. Standard For Hardness Test Of Soft Plastic or Soft Rubber.
Shore A Durometer is widely applied in the low-medium hardness plastic, all kinds of rubber, multi-dimensional fat, leather, wax etc
Digital Shore A Durometer. Measure penetration hardness of soft rubber & elastomers.
TIME Digital Shore A Durometer, rubber hardness tester from TIME HighTech
Bareiss mechanical Shore D Durometer, scale graduation is 0-100 Shore, divided in 100 units.
Teclock mechanical Shore D Durometer for Hardness test of hard rubber or hard composite materials such as thermoplastic.
Shore D Durometer suitable for hardness test of common hard rubber, hardened resin, acryl, Plexiglas etc.
Digital Shore A Durometer. Measure penetration hardness of soft rubber & elastomers. Internal memory 500 readings.
Digital Shore D Durometer / Hardness tester for testing hardness of harder Plastics and Rubbers.
TIME Digital Shore D Durometer/Hardness Tester for the testing of hard rubbers and plastics.
Durometer Test Block kit for either Shore A or Shore D scale, enables user to perform a quick check for proper durometer operation.
These upright stands can be used to mount Teclock dial Indicator Durometers for comparison measurement.
Range of Bareiss test stands, clamps and accessories for all Bareiss hardness testing equipment
A digital hardness tester with constant contact pressure and measuring time acc. to standards. This durometer is an easy to use hardness tester.
Hardness tester to test soft elastic materials, for the measuring range IRHD NORMAL, according to DIN ISO 48 (DIN 53519/1).
Digital, manual hardness tester Shore A, B, 0, C, D, D0, 00, 000
This durometer is a testing device for the determination of the firmness of fruit pulp.
HPE II Barcol is a digital hardness tester. The HPE II Barcol is an easy to use digital hardness tester
The GS-754G is a shore OO mechanical Durometer from Teclock in Japan for measuring very soft rubbers. Fitted with peak hold indicator.
HPE II Car interior is a durometer, suitable to test hardness on foamed materials - on difficulty accessible places, too - e.g. Car interior. This HPE II Car Interior durometer
reads measured values
The GS-751G is a Shore C Mechanical Durometer for testing hard rubbers, from Teclock in Japan. It is easy to use with peak hold dial.
Manual hardness tester, Shore DO mechanical type, scale graduation is 0-100 Shore, divided in 100 units.
Range of Durometers for testing compounds in scales other than Shore A or Shore D